lightning arrester Type 1 2 Surge Protection Devices suppliers

Contact NowClass B Lightning Surge Protectors Lighning Surge Protectors Are Designed to Protect Low-voltage Systems Against High Surge Currents and Overvoltage in Cases TriggeredOBV8 series Class B Lightning Surge Protectors are highly inevitable part of any AC Power Electrical Installations. Lighning surge protectors are designed to protect low-voltage systems against high surge currents and overvoltage in cases triggered by indirect or direct lightning strikes....Read More
Contact NowPlug-in Lightning Current Arrester, in Accordance with Type 1/Class I, for 3-phase Power Supply NetworksOBV10-I-50-Pluggable Pluggable lightning current arrester for higher nominal voltages, in accordance with Type 1/Class I, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N). lightning current arrestors OBV10-I-50 meet the type 1 requirement class according to IEC...Read More
Contact NowType 1 Protectors Against Transient Overvoltages for Power Supply Lines.OBV10-I-25 The highest protection against transient overvoltages for power supply lines at the point they enter the building. OBV10-I-25 series provide protection even against direct lightning strikes. Tested and certified with lightning impulse current, 25kA, 10/350μs wave. lightning current...Read More
Contact NowUniversal Varistor-based Plug-in Lightning/surge Arrester for 3-phase Power Supply Networks with Separate N and PE (5-conductor System: L1, L2, L3, N, PE).OBV5-B60 series Universal varistor-based plug-in lightning/surge arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE). The combination lightning current and surge arrestors OBV5-B60 meet the type 1+2 requirement class according to IEC...Read More
Contact NowPlug-in Varistor-based Lightning Current Arrester for 3-phase TN-S Power Supply Networks with Separate N and PE (5-conductor System: L1, L2, L3, N, PE), for Lightning Protection Levels III and IV, with Remote indication ContactOBV5-B60 series Plug-in varistor-based lightning current arrester for 3-phase TN-S power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), for Lightning Protection Levels III and IV, with remote indication contact. The combination lightning current and surge...Read More
Contact NowHeavy Duty AC Surge Protection Device (SPD) for High Risk, Low Tolerance Electrical Service Entrance ApplicationsOBV10-I-15 heavy duty AC Surge Protection Device (SPD) for high risk, low tolerance electrical service entrance applications. The OBV10-I-15 provides protection against the direct and indirect effects of lightning and is particularly useful in a high lightning area where the risk of heavy surge...Read More
Contact NowLightning Current Arrester Class 1 for AC Power SuppliesOBV10-I-50 Lightning current discharge arrester with spark gap for the use in three-phase TT and TN-S systems.They provide extremely high discharge cappabilities with at the same time very low protection levels and they also do not need any damageable internal or external electronic trigger....Read More
Contact NowHeavy-Duty AC Surge Protector Combines A High-energy Varistor (MOV) Network with A Gas Discharge TubeOBV7 series lightning current arrestors OBV7 meet the type 1 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions. The voltage-limiting, high-performance spark gaps...Read More
Contact NowHeavy Duty AC Surge Protection Device (SPD) for High Exposure Applications Such As Direct Lightning Strikes Capacitor Bank Switching and Large inductive LoadsOBV7 series heavy duty AC Surge Protection Device (SPD) for high exposure applications such as direct lightning strikes, capacitor bank switching and large inductive loads. The OBV7 series is a single pole device that incorporated a multi-varistor circuit. It offers unmatched mechanical...Read More
Contact NowType 1/Class I Lightning Current Arresters Able To Discharge Energy (current) from A Direct Lightning Strike (10/350µs) On An External Lightning Protection SystemOBV10-I-25 Type 1/Class I lightning current arresters, able to discharge energy (current) from a direct lightning strike (10/350µs) on an external lightning protection system (LPS) or overhead supplies, in accordance with EN/IEC 61643. Suitable as the first step of protection in incoming power...Read More