Wenzhou Chuangjie Lightning Protection Electrical Co.,Ltd
Contact US
Address: Lvzhuang Industrial Zone, Liushi, Yueqing, Zhejiang, China
Tel: 86-577-62786680
Fax: 86-577-62730590
Surge Protection Devices for Discharging Induced Transient Overvoltages (Type 2 / Class II), In Accordance with IEC 61643-11.DIN Rail Plug-in format

Surge Protection Devices for Discharging Induced Transient Overvoltages (Type 2 / Class II), In Accordance with IEC 61643-11.DIN Rail Plug-in format

OBV5-C40 series DIN Rail AC Surge Protective Devices are connected in parallel and use an MOV to clamp high-voltage surges. These devices are primarily used in the main electrical panel for the protection of 1- and 3-phase systems. The surge arrestors OBV5-C40 meet the type 2 requirement class...

    OBV5-C40 series

    DIN Rail AC Surge Protective Devices are connected in parallel and use an MOV to clamp high-voltage surges. These devices are primarily used in the main electrical panel for the protection of 1- and 3-phase systems.


    The surge arrestors OBV5-C40 meet the type 2 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions. The use of high-performance varistors permits a rapid response time and a low protection level, without any line follow current. If circumstances are uncertain and there is a risk of fire from an overload, the internal cut-off unit disconnects the arrestor from the mains if necessary.


    + Connectable surge arrestor
    + High arresting capacity
    + Visual status display
    + Available with optional remote signalling
    + Vibration-proof
    + Simple standard hat rail mounting
    + Labelled connections
    + Voltage encoding


    Model:                                    OBV5-C40

    Maximum continuous voltage AC

    Uc

    V

    275/320/385/440

    SPD to EN 61643-11

     

     

    Type 2

    SPD to IEC 61643-1

     

     

    class II

    Nominal discharge current (8/20µs)

    In

    kA

    20

    Maximum discharge current (8/20µs)

    Imax

    kA

    40

    Voltage protection level

    Up

    kV

    < 1,3/1,5/1,8/2,0

    Response time

    tA

    ns

    < 25

    Maximum back-up fuse

     

    A

    125

    Temperature range

    ϑ

    -40℃~+85℃

    Protection rating

     

     

    IP 20

    Max. cable cross-section flexible (fine-wire)

     

    mm²

    25

    Max. cable cross-section rigid (single wire/multi-wire)

     

    mm²

    35

    图片23.png

    Welcome to buy the surge protection devices for discharging induced transient overvoltages (type 2 / class ii), in accordance with iec 61643-11.din rail plug-in format with our professional manufacturers and suppliers. We are one of the famous brands and we are equipped with a productive factory at your service. Please be free to enjoy our good price and service.

Related Products
Inquiry