OBV10-I-50 Lightning current discharge arrester with spark gap for the use in three-phase TT and TN-S systems.They provide extremely high discharge cappabilities with at the same time very low protection levels and they also do not need any damageable internal or external electronic trigger....
Lightning current discharge arrester with spark gap for the use in three-phase TT and TN-S systems.They provide extremely high discharge cappabilities with at the same time very low protection levels and they also do not need any damageable internal or external electronic trigger.
lightning current arrestors OBV10-I-50 meet the type 1 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions.The voltage-limiting,high-performance spark gaps provide several benefits.A short response time, a low protection level and high current leakage capability with long service life.
+ Connectable lightning current and surge arrestors
+ High arresting capacity up to 50 kA (10/350μs) per pole
+ Combination arrestors for buildings with lightning protection system
+ Simple standard hat rail mounting
+ Labelled connections
+ Usable in systems with lightning protection class 1-4
Maximum continuous operating voltage
SPD to EN 61643-11
SPD to IEC 61643-1
Lightning impulse current (10/350μs)
Lightning impulse current (10/350μs) [total]
Nominal discharge surge current (8/20μs)
Arrester surge current (8/20μs) [total]
Voltage protection level
Follow current quenching capacity Ipeak
Maximum back-up fuse
Connection cross-section, rigid
Connection cross-section, multi-wire
Connection cross-section, flexible
Welcome to buy the lightning current arrester class 1 for ac power supplies with our professional manufacturers and suppliers. We are one of the famous brands and we are equipped with a productive factory at your service. Please be free to enjoy our good price and service.