Wenzhou Chuangjie Lightning Protection Electrical Co.,Ltd
Contact US
Address: Lvzhuang Industrial Zone, Liushi, Yueqing, Zhejiang, China
Tel: 86-577-62786680
Fax: 86-577-62730590
Surge Protection for Photovoltaic/solar Systems DC Surge Protection Device (SPD) for Medium Risk DC Power Applications Up to 1000VDC

Surge Protection for Photovoltaic/solar Systems DC Surge Protection Device (SPD) for Medium Risk DC Power Applications Up to 1000VDC

OBV5-C40-PV Surge protection for photovoltaic/solar systems. DC Surge Protection Device (SPD) for medium risk DC power applications up to 1000Vdc Providing power with photovoltaic solar panels is tremendously interesting in the context of renewable energy sources, as regards economical...

    OBV5-C40-PV

    Surge protection for photovoltaic/solar systems. DC Surge Protection Device (SPD) for medium risk DC power applications up to 1000Vdc


    Providing power with photovoltaic solar panels is tremendously interesting in the context of renewable energy sources, as regards economical photovoltaic systems connected to the public electricity network. Because of their exposition , frequently in isolated sites and of the extended surface of photovoltaic systems (PV), lightning strikes are a major components in the risk to be assumed, both for the direct effect of lightning on the structures, and of the surge overvoltages on the installation. Cells are generally associated with inverters. CUAJE® has developed a specifc Din Rail product to protect DC side of cells and inverters against surge in power plant or residential application. In case of indirect surge , the cells, their electronic components and semi-conductors in the inverters which are essential and expensive equipment could be damaged. The reason is because the electronic components can not support the high value of over voltage.


    Prewired modular complete unit for use in photovoltaic systems consisting of a base part and plug-in protection modules
    Combined disconnection and short-circuiting device with safe electrical isolation in the protection module prevents fire damage resulting from d.c. switching arcs (patented SCI principle)
    Tried and tested fault-resistant Y circuit of the OBV5-C40-PV prevents damage to the surge protective device in case of insulation faults in the generator circuit
    Integrated d.c. fuse allows safe replacement of protection modules without arc formation.


    Detailed description
    With the MOV (Metal Oxside Varistor), the overvoltage will be limited at the value of the voltage protection level of the OBV5-C40-PV DC surge protector. Our surge protector, as recommended in standards and guides, insure all protections (between + and-, + and Ground, - and Ground). On each surge arrester, as option, an available auxiliary contact will inform the end life status to ensure a maximum effciency.


    One easy solution
    With this solution, many cells in power plant and residential application have been protected. If you don't protect your cells, in case of several big surges, your cells will be completely damaged and in case of many small surges without visual damages for you, your effciency will go down over the years. You should use a surge protection to have a better return on investment. Class C surge protection for photovoltaic
    Discharge current In: 20kA / Imax: 40kA
    Plug-in modules
    Remote signal option
    IEC 61643-1 compliance
    OBV5-C40-PV DC series are Class C Surge Protection Devices, they designed to protect against lightning surge voltages in photovoltaic power supply networks. These units must be installed in parallel on the DC networks to be protected and provide common and differential modes protection. The OBV5-C40-PV DC series are availa-ble for the main operating voltages in photovoltaic : 500, 600,800,900 and 1000 Vdc. The use of Class C Surge Protection Devices are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long. The electrical diagram of the OBV5-C40-PV DC series are based on high energy MOVs equipped with specific thermal disconnectors and related failure indicators. A remote signal feature is also available
    The OBV5-C40-PV DC series are made with plug-in modules to allow a fast and easy maintenance in case of fa-ilure (disconnection from the DC network).


    Model: OBV5-C40-PV series

    Network voltage

    500Vdc

    600Vdc

    800Vdc

    900Vdc

    1000 Vdc


    Max. operating voltage Uc

    530Vdc

    630Vdc

    840Vdc

    950Vdc

    1060 Vdc


    Nominal discharge current ln

    20kA

    Max. discharge current lmax

    40kA

    Protection level (at In) Up

    1.8kV

    2.5kV

    2.8kV

    3.0kV

    3.2kV


    Disconnector

    Thermal Disconnector

    Internal

    Mechanical characteristics

    Dimensions

    See diagram

    Connection

    by screw terminals: 4-25 mm2

    Disconnection indicator

    1 mechanical indicator by pole

    Mounting

    symmetrical rail 35 mm

    Operating temperature

    -40/+85°C

    Protection class

    IP20

    Standards compliance

    NF EN 61643-11 France

    Parafoudre Basse Tension - Essais Classe II

    IEC 61643-1 International

    Low Voltage SPD - Test Class II

    EN 61643-11 Europe

    Parafoudre Basse Tension - Essais Classe II

    图片1.png

    Welcome to buy the surge protection for photovoltaic/solar systems dc surge protection device (spd) for medium risk dc power applications up to 1000vdc with our professional manufacturers and suppliers. We are one of the famous brands and we are equipped with a productive factory at your service. Please be free to enjoy our good price and service.

Related Products
Inquiry